THIRDREALITY ZigBee Smart Plug 4 Pack with Real-time Energy Monitoring,15A Outlet, Zigbee Repeater,ETL Certified,ZigBee Hub Required,Work with Home Assistant,Compatible Echo Devices and SmartThings
$38.99
Related Products
Product description
Third Reality Smart Plug is a simple solution to make the intelligence appliances smarter, like lights, fans, coffee makers and more. After the update, Smart Plug Gen2 keeps all former features and upgrade with real-time power monitoring and restore status.
Schedule and Timer Function
Set the schedule or timer to automatically turn on/off any home electronic appliances, to make your life more intelligent.
Group Control
Along with Smart App, you can have a lot of advanced groups features for smart home.
Remote Control
Easily control your home appliances anytime, anywhere, no limited of time and distance.
Voice Control
When connect with compatible Echo Devices or other Zigbee hubs that can work with smart speaker, you can use voice commands to turn on/off your plugs.
Compatible Devices 
Energy Monitoring & Dashboard
In SmartThings App, you can see the energy cost, history and dashboard, then create routines.
Energy Monitoring & Dashboard on ZHA and Z2M
Restore status available on ZHA & Z2M, it means user can customize on/off status after power-on.
Remote Control and Real-time Energy Monitoring
In Hubitat, you can remote control the smart plug and see the real-time energy cost.
Real-time Monitoring, Total Consumption, History
Third Reality supports remote control, total consumption,real-time power monitor and restore status.
1 Over view
2 SmartThings
3 Home Assistant
4 Hubitat
5 Third Reality
More Application Scenarios 
Zigbee Repeater 
Third Reality Smart Plug uses Zigbee Low Energy Mesh wireless technology which allows for a farther reach, enabling whole-home installations. Each one serves as a signal repeater, even if a smart plug is out of reach from the Alexa Echo device, it can still be controlled using the Mesh network.
When the Smart Plug Gen2 paired with Hubitat hub, but can’t see current state and can’t control it in Hubitat?
Please change the device type to “Generic Zigbee Outlet” in Hubitat, then it should work properly.
What platfroms support energy monitoring?
You can see the energy monitoring dashboard in SmartThings and Home Assistant(Z2M/ZHA), create routines when the consumption is too high or too low.
Does it works as a Zigbee repeater?
Yes, it works as a ZigBee repeater, which is a very practical function that extends the signal range with mesh network.
What is the function of restore status? And which platforms are available?
Restore status means users can customize on/off state after power-on again, it is available on ThirdReality App and Home Assistant Zigbee 2 MQTT.
Why does my Smart Plug Gen2 show electricity usage even when nothing is plugged into it?
Even when nothing is plugged in, the Smart Plug itself uses a tiny bit of electricity—less than 1 watt—just for being turned on. We show this small amount on the display to make sure you’re fully aware of any power it uses.
ZIGBEE 3.0 STANDARD: Works with compatible Zigbee hubs or Echo devices with Zigbee hub built-in. Such as Echo (4th Gen), Echo Plus (1st Gen and 2nd Gen), Echo Show 8 Gen3, Echo Show 10 (Gen2 and Gen3).Echo Studio, Eero 6, Eero Pro 6, Home Assistant, SmartThings 2015/2018, Aeotec, Hubitat, Homey Bridge, Homey Pro, Third Reality Hub Gen Plus and Third Reality Smart Bridge. Zigbee Hub Required.
EASY SETUP and COMPATIBLE DESIGN: Maximize efficiency and convenience with space-saving design that won’t occupy the adjacent socket. Super easy setup with Compatible Echo Devices, just plug the Smart Plug in the wall outlet and say “Alexa, discover my devices” , then it will automatically find the plug. Please get in touch with us when you meet any problems or need further support.
REAL-TIME ENERGY MONITORING: Monitor current consumption of your plug-in devices, effectively save energy and reduce waste. This function supported by Home Assistant, SmartThings, Hubitat and THIRDREALITY smart hub Gen2.
SAFETY SETTING: In order to ensure your home safety, we also realize the function of restoring status that means users can customize on/off state after powered on again. Currently THIRDREALITY Hub Gen2 and Home Assistant (ZHA and ZigBee2MQTT) support this function.
REMOTE CONTROL & VOICE CONTROL: Easily control your home appliances anytime, anywhere, no limited of time and distance. When Smart Plugs connect with compatible Amazon Alexa Echo Devices or other ZigBee hubs that can work with Alexa or Google Home, then you can free your hands, just delivering voice commands to turn on/off your plugs.
HOME AUTOMATION: Intelligent life starts with automatically turning on the coffee maker and toaster, enjoy a leisure breakfast. With more features, you can place a mount of plugs in one group, so that you can control all the plugs in the group with one click.
11 reviews for THIRDREALITY ZigBee Smart Plug 4 Pack with Real-time Energy Monitoring,15A Outlet, Zigbee Repeater,ETL Certified,ZigBee Hub Required,Work with Home Assistant,Compatible Echo Devices and SmartThings
Add a review
$38.99
Will –
Solid solution for Zigbee smart plugs with Home Assistant
I have more than a dozen of these set up in my house via Home Assistant since at least January 2025 and they work great. I have automations set up for them (i.e. turning dehumidifiers on and off based on humidity and weather, bird bath heater based on outside temp, etc.), dashboards containing power usage stats, and buttons for turning things on and off in dashboards (“dumb” lights, small appliances, etc).Everything I need these plugs to do – they do without many problems. The firmware updates have been smooth, they are reliable, and seem to help with the Zigbee network for wireless devices further away from the coordinator (though anecdotal, I’ve never tested it, nor do I plan to). Easy to use, versatile, and quick reliable connection with a quality home zigbee hub. You can actually hear the relay clicking on and off when cycling the power, and I appreciate the button on the side to manually trigger the plug in case you need to.The only downside and issue I run into with these is the size. They are a bit large and don’t easily allow for multiple to be connected in one duplex outlet, and they take up a lot of space on horizontal power strips. I try and use these with well spaced vertical power strips for multiple devices and stay mindful of space when thinking of a use case.I have never tested the power consumption of the devices themselves, but I imagine it’s negligible.
Customer1701 –
Works as advertised. Convenient, useful and informative.
Manual states that they are good for up to 15 amps, 1500 watts. Looks like it is good for it. I am running 1200+ watts through one right now.I thought I had killed one. I was wrong. We seemed to be having another power problem that cause one unit to flake out. A power outage the other day that turned out to be a bad connection at my house electric company meter proved that the socket itself had not gone bad. It was just ‘scrambled’ / ‘confused’.The manual for these tells how to perform a factor reset. I did. It still would not show up in my zigbee devices. It took a lot of fussing to work out it was stuck in bluetooth pairing mode. Eventually I worked out how to get it out of that mode and become visible again as a zigbee device. Major pain in the butt. But it is back online and works correctly.So, verdict? It does work. It is responsive to zigbee commands. It works fine with household portable heaters. I took my newly recovered socket and put it onto a heater that has a nasty bug: If the power goes off at the heater, when it comes back on it is running at full power, with no high temperature limit. So I put it on the socket, and set the socket to not turn on after a power loss. That takes care of the risk if we are out of the house when a power outage occurs (however brief). I also put it there so I can monitor power use. That is a great feature on these. I can remotely see how much power the heater is drawing, and turn it off if I need to. Even when I am off in the wild world of fast food restaurants, or some such.Worth buying? Yes, if you are me. For the two reasons I noted above. If I go pickup another thermometer unit, I can setup a script that watches room temperature and can turn it on or off as needed automatically. Exactly what these are built for.I still stand behind the comment below about not using them for things like motors (that do not specifically have a ‘soft start’ feature). Those can kill any electronic switch not built for the power draw spike.—— Old review.. take two grains of salt – I retract it.——It looks like I managed to kill one by plugging in a room heater into it.This plug works great with Home Assistance , using Zigbee2MQTT. I could see from the power usage sensor that the heater was drawing up to 1300 watts. It seems to work fine. They have been connected together for a day or two. I even wrote an automation to turn it on in my home office before I start work.Just a few hours ago, I turned it off. But it did not turn off. The manual power button works on it. So I followed the instructions on how to wipe it back to factor default and re-pair to my Zigbee network. Removed the device from Home Assistant (HA) and stepped through pairing again. There she is! Add it back into HA and it shows up as a Zigbee Smart Plug from ThirdReality.But.. during the paring process there is an ‘interview’ stage where HA works out if the device is reporting sensor data and its attributes. This never completes.I bought the four pack and have only used two. So I delete this plug from HA and paired up another one. It paired up quickly and completed the ‘interview’ instantly.So… yeah.. Maybe just a bad one. Maybe I fried it. I have put the newly paired plug back on the heater. We shall see if it holds up over the next week.Outside of that consideration, I haven’t had these very long. Not long enough to give a real review. Just share something you should know.Last little nugget of knowledge: Electronic switches (smart or just a timer) do not do well with major load spikes like running electric motors. That is why they are frequently suggested as not the right solution for things like pond or well pumps. You just burn them out. They do make electronic switches built to survive that workload. I will guess this is not that kind of switch.Be that as it may, so far these are working fine on low power draw workloads (like my desktop PC)
popoway –
Seamless Zigbee Smart Plug for Home Assistant
These THIRDREALITY smart plugs work perfectly within Home Assistant (I’m using ZHA), and the setup was smooth. They paired quickly, and I love the real-time energy monitoring—it’s great for tracking usage. The compact size doesn’t block the second outlet, which is a huge plus. I’ve had no connectivity drops, and they also act as Zigbee repeaters, which improved my mesh network. It’s a solid value for four plugs. Just remember, you do need a Zigbee hub to get started.
Steven –
Works Perfectly with My Smart Setup
These smart plugs have been great so far. Home Assistant integration was a breeze! They also paired with my Echo hub in just a couple of minutes and have been totally reliable ever since. I use them for lamps and a coffee maker, and I like being able to track energy use and see what’s actually drawing power. The signal is strong too, acting like a repeater that keeps everything connected around the house. For a set of four, the price feels fair, and setup couldn’t have been easier.
Luden –
When they work, they’re awesom
Trouble syncing, even following instructions. My home architecture might be somewhat to blame, but I doubt it. Each switch took 10-20 full minutes of trial and error to synchronize correctly. That being said, once synced, they’re incredibly reliable and help extend the range and response of my smart devices. The power meter also is a great addition and seems very accurate, enough to live diagnose power usage. Of there could be better at syncing, they’d be five stars, especially for the price.
Andrea Stelter –
Best plug control devices I’ve owned!
These things are bullet proof. I’ve had devices from all sorts of popular (and expensive) brands. I’ve been disappointed by every single one except these THIRDREALITY devices. They just work. REALLY well. HomeAssistant integration with Zigbee is perfect. Could they flash their firmware faster? Sure. Repeater function works well, builds a nice mesh. Energy monitoring is excellent and has helped me build some really powerful automations. Handles some impressively heavy loads too. I have accumulated more than ~16 of these devices as a result of them being awesome.
Eric Senterre –
J’ai acheté ces prises intelligentes Zigbee et j’en utilise maintenant trois dans la maison (ventilateur sur pied, cafetière et lave-linge). Je suis vraiment impressionné par leur performance.Le pairage avec mon système Home Assistant (ZHA) s’est fait sans le moindre problème. La fonctionnalité de mesure de puissance électrique en temps réel est un vrai game-changer pour les automatisations avancées. J’ai pu transformer ma cafetière ordinaire en cafetière intelligente en détectant quand elle est en marche et arrêtée. Même chose pour mon lave-linge – je reçois maintenant une notification quand le cycle est terminé, juste en surveillant la consommation électrique.Bonus : ces prises agissent aussi comme des routeurs Zigbee, ce qui a considérablement renforcé et stabilisé mon réseau maillé. Depuis leur installation, mes autres appareils Zigbee sont beaucoup plus fiables.Seul petit bémol (et je chipote vraiment) : elles sont un peu larges, mais c’est le cas de pratiquement toutes les prises intelligentes sur le marché. Ça ne bloque pas les prises adjacentes dans mon cas.Pour ce prix, c’est un achat sans hésitation. Je les recommande sans réserve!
Leonardo –
O plu funciona perfeitamente com Philips Hue (sem medição).Muito importante! Precisa de atualizar ele antes. A atualização é direta pelo APP e bluetooth, não precisa de nenhum hub ZigBee. Feita a atualização basta resetar o plug novamente e adicionar. Nas primeiras tentativas ele não apareceu no App Philips Hue, mas depois que tirei da tomada e resetei, consegui adicionar.No aplicativo HOME o plug entra como luz, basta alterar pra plug. Ele onsegue puxar a informação do Hue. Isso é ótimo, diferente dos plugs paralelos ZigBees (Hue + Home) que eu tenho.
CARLOS VAZQUEZ CHAPA –
Buen producto, lo uso para monitorear el consumo en lavadora y secadora y al conectarse a Home Assistant me avise cuando termine el ciclo.Son de buen material, fácil de hacer la conexión con Zigbee y sin problemasAnteriormente había comprado un sensor de vibración de la misma marca por lo que ya la conocia , y no defrauda, 100% recomendable
O Marquis –
Highly recommended, I have 8 and I plan to add more to my network. Perfect to automate the “reboot” of some devices (router, modem, security system, etc.) and to monitor the energy consumption (like dehumidifier).Pros- Small, excellent size, fit almost everywhere.- Pair with Home Assistant Zigbee2MQTT instantly without any manual config.- Robust signal, act like a router.Cons- Minor issue, sometimes you cannot update the device through HA Zigbee2MQTT, you can send command and it works, but the updates don’t work. I guess the location of these smart plugs aren’t ideal (near a wifi router or behind a metal drawer, but I would expect the update to works very slowly instead of not working at all. I have to move the smart plug, do the update and put it back.Other- If ThirdReality would make Zigbee power bar I would be really interested.
Luis P. –
Mi antena ZHA lo detectó casi de inmediato y el emparejamiento fue rápido, solo el firmware se tuvo que actualizar, y dos días después de instalarlo ha funcionado genialDa información también de electricidad en uso, recomendable