





Product description

Sturdy Structure& Base 
Height Adjustable 2.4-15.7inch 
Safer Edge Design 
Upgraded Structure 
Support Column

【Sit to Stand Desk Converter】 Ergonmic Design Hieght adjustable desk riser. Relieve long term sedentary posture. 6 levels height adjustment for most your choice to transform any table to standing desk.
【Save Desktop Space】Ergonomic Standing Keyboard Tray with a 23.6″ x 13.4″ platform. Suitable for you keyboard and mouse rising and down. Also suitable a laptop, note book or small monitor.
【Sturdy Structure& Base】Rectangular stable steel base with upgraded round corner design. Classic double X cross support provieds more stability at the suitable height when you adjusta the standing desk converter.
【Easy Height Adjustment】This keyboard and mouse riser adjustable range : 2.1-15.3 inches. Designed with 6 heights, the stand up desk riser can be adjusted in multiple positions. Notice: please better use both hands to operate up and down.
【Convenient without Assembly】Just open the packa and you can use it directly. Easy to move it to any desktop. You will adjust it freely. If U got any problem, please feel free to contact us.
8 reviews for Keyboard Riser for Desk- 23.6’‘ Height Adjustable Standing Desk Converter, Table Lifter for Standing, Keyboard and Mouse Riser for Ergonomic Sit Stand Workstations, 6 Height Levels
Add a review
$66.99
Courtland Owen –
Sturdy and great to asset for those that want to Walk From Home while we work
More expensive than other options, but ended up being a better fit. This was the second stand I bought. The first one was made of plastic and wiggled alot. It was good to stand with, but not much else. This is sturdy. I’m able to use it to lift my keyboard up enough so I can use my treadmill under my desk. Strong enough to rest your arms on without it falling down.
♾️ D-Infinity ♾️🐾🐶🐱🐾 –
Nice and sturdy adjustable riser
I set up and used the height-adjustable desk riser, and here’s how it performed: the steel double-X support gives it a sturdy feel even when elevated, and with six height levels (2.1 to ~15.3 inches), it was easy to switch between sitting and standing. The keyboard tray and mouse area felt roomy and usable, and the riser lifts smoothly if you use both hands. It’s not completely rigid when pushed hard, but for regular office work, it does the job nicely. The unit comes ready to use, no assembly required, and fits neatly on most desks.This review reflects our personal opinions and experiences with the product. It is always wise to consider comments, suggestions, pros/cons, and carefully evaluate your needs before purchasing. We hope this review helps you make a well-informed decision.⭐⭐⭐⭐⭐ = Loved It⭐⭐⭐⭐= Liked It⭐⭐⭐= It’s Okay⭐⭐= Disliked It⭐= Hated It
Christopher –
Works but cheaply made and will eventually fail
I bought this a year ago and now I know where they went cheap on it. There’s a little plastic tab underneath the desk that holds all the weight from whatever you put on the desk. Everything else is metal except that tab. Mine broke and had to super glue it back on. All I can say is don’t put too much weight on it. And don’t push it down until your sure the lever is fully depressed. They must have known this would be a weak point on the desk. Hints this one is $50 and others are $100.Also it’s barely big enough for a mouse and keyboard. You have 0 room for a mouse almost.
C. Grover –
Well packaged — came with a scratch or ding on it!
This standing height rack for your laptop or presentations is very nice. It is high quality, and it comes fully assembled and ready to use. I only gave it a 4 star rating for one important reason. It is easy to raise this platform. It is so difficult to lower it. The directions say, “Hold both ends of the table with both hands. Press and hold the switch handle down and gently lift the desk up with both hands, then put it down.” Huh? If I am holding each end using BOTH hands, how can I simultaneously press and hold the switch handle down? I tried it, my neighbor tried it — neither of us could do it. The only way we could get the table to lower was for two people to do it — one to hold both ends with both hands, and one to press and hold the switch handle down. Needing two people to lower it is not terribly convenient. I will say, it came impressively packaged without a single scratch or ding on it. Overall, I do like this product, I just wish it was a bit easier to lower.
Dov W. –
Works well, assembly is a breeze.
Great riser, just make sure your keyboard fits on it, most should but an oversized one might be difficult.
Dalia –
Easy to use and set up
Assembled right out of the box and was well-packaged to prevent any damage in transit. Easily sets up on top of the desk to use as a standing desk for laptops, and adjustable to your comfortable height. As mentioned in other reviews, the lowering mechanism is not as simple as raising it up, despite the instructions on how to do so. I have to flip it around in order to unlatch to lower it. When not in use I have it under my desk and can serve as a leg rest as well with a pillow or blanket on top to provide some padding. Overall good product and see myself using it when I need a break from sitting down at my desk.
Mitnick –
Very Good, Not without Flaws
The packaging was excellent, no damage in transit. Setup is easy as it comes preassembled.The overall quality I would rate as a very good. It definitely does it’s job. Although it is heavier that it looks, so when lowering it, it is important to make sure you have a good grip on both sides.At $70 I would expect some spring resistance or something that provides a little support. So there is a risk of damaging your device if you lose your grip.On the other hand, $70 for a sturdy desk that raises fairly quickly that is priced cheaper than motorized standing desks and a little more affordable than some other pneumatic standing desks is still 4 stars good.
Jared H –
Solid Purchase
Easy to operate. Sturdy. Priced well.