QWORK MC-31 Wired Surface-Mounted NC Magnetic Door Window Contact Sensor Alarm Reed Switch, White, Pack of 10 with 40 Screws

Add your review

$8.97

$8.97


Note: Prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to your order. As an Amazon Associate, we earn from qualifying purchases.
Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Product description

SensorSensor

Sensor

Product name: Surface-mounted Magnetic Door Switch, Type: MC-31, Color: White, Material: Plastic.

NC TypeNC Type

NC Type

NC means normally closed. If the magnet is closed to this switch, the signal is conductive, otherwise, if the magnet is far away from this switch, the signal is disconnected.

SizeSize

Sizes

64*12.*12mm and 64*20*12mm(L * W * H ), suitable for magnetic windows, doors, cabinets etc. Ideal for door, window security.

PackagePackage

Package Content

Includes 10 Pcs Magnetic Door Switch with 40 Screws.

Product name: Surface-mounted Magnetic Door Switch, Type: MC-31, Color: White, Material: Plastic
Specification: Contact Type: NC, Hole Dia.: 5.8mm, Actuation Distance: 8mm±18mm
Sizes: 64*12.*12mm and 64*20*12mm (L * W * H), pack of 10 with 40 screws.
NC Type: NC means normally closed. If the magnet is closed to this switch, the signal is conductive, otherwise, if the magnet is far away from this switch, the signal is disconnected.
Applications: It is suitable for magnetic windows, doors, cabinets etc. Ideal for door, window security.

10 reviews for QWORK MC-31 Wired Surface-Mounted NC Magnetic Door Window Contact Sensor Alarm Reed Switch, White, Pack of 10 with 40 Screws

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. TheCyberQuake

    Great for smart home stuff
    Using this as a switch for custom smart home devices. They work perfectly and have just the right amount of sensitivity. Now I have the window mount AC set to turn off when am the door for the room is left open for too long

    Helpful(0) Unhelpful(0)You have already voted this
  2. Ash

    ok, not great. 2 out of 10 were DOA
    Well, for starters, two out of the 10 in the pack were defective. Not a good start, specially since I wired up the first one and everything was good. Wired up the second one and nothing seemed to work right. Took a while to accept the possibility that the “new” sensor was DOA, which it was.Figured, I’d save myself the pain and test the remaining and found another defective one. Which raises the interesting question on product quality, and how long the non-defective ones will work.Also, I’m sure the terminology for NC and NO is reversed here. Consider it a switch – NC or normally closed would imply that the switch is closed and conducts a signal/electricity, and NO would not. In its “normal” state, i.e. without actuation this does not conduct so I’d think this should be labeled as NO. The description and pictures do explain how it works, so take a minute to verify.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Alex

    Every single one was defective
    The bag contains 10 magnet sides and ten switch sides. All the switches are supposed to be open when the magnet is away and closed when near. Installed a few and they weren’t working. Opened every single one and the switches were all stuck closed. The magnets had no effect on the circuit whatsoever. To late to return. Waste of money.

    Helpful(0) Unhelpful(0)You have already voted this
  4. greg

    Alarm door sensors
    A little thinner grade compared to my original but they work fine that’s all that matters price very reasonable and now I have plenty extras

    Helpful(0) Unhelpful(0)You have already voted this
  5. PK

    NC Magnetic Reed switch
    Definition of NC for a switch ( in electronic engineering) would be that the switch is closed when not energized/ quiescent state — here NC means closed when magnet is close by — this is backward of expected. Other than that the product is great , well designed and manufactured.

    Helpful(0) Unhelpful(0)You have already voted this
  6. J. S

    Need additional magnets>
    I needed extra magnets for my simply safe system and saw these and hoped they word work since they were less than half the price of the Simply Safe magnets. They worked just fine using a dab of hot glue instead of screws.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Rob

    Cheap enough if one or two are defective
    One of these failed out of the box, which I guess is ok since they are so cheap. They also don’t have much range with enclosed magnets, and I had to add my own to get my sensors to work in some cases.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Another user

    Poor Quality
    Out of 4 switches that I tried, one is always closed, and another one has a screw that won’t loosen to screw a wire onto it.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Kam

    Perfey

    Helpful(0) Unhelpful(0)You have already voted this
  10. sylvain gilbert

    Fonctionne parfaitement, bon rapport qualité prix

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    QWORK MC-31 Wired Surface-Mounted NC Magnetic Door Window Contact Sensor Alarm Reed Switch, White, Pack of 10 with 40 Screws
    QWORK MC-31 Wired Surface-Mounted NC Magnetic Door Window Contact Sensor Alarm Reed Switch, White, Pack of 10 with 40 Screws
    TheTech-Zone.org – Powering Your Digital World!
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart